Monday, August 6, 2012

Rangkaian Penerima Radio Fm Sederhana

type='html'>
Here is a FM radio circuit using IC7400. IC TDA7000 is a monolithic integrated circuit for mono FM portable radios, where a minimum on peripheral components is crucial. The IC TDA7000 has a Frequency-Locked-Loop system with an intermediate frequency of 70 kHz. The intermediate frequency selectivity is achieved by active RC filters. The only function which needs alignment is the resonant circuit for the oscillator, thus selecting the reception frequency. Spurious reception is avoided by means of a mute circuit, which also eliminates too noisy input signals. Special steps are taken to meet the radiation requirements

Penerima Radio FmSkema Rangkaian Penerima Radio Fm


• L1 and L2 wind 5 turns of 0.6 mm enameled Copper wire on a 4 mm dia plastic former.


IC TDA7000 Description

The TDA7000 is a monolithic integrated circuit for mono FM portable radios, where a minimum on peripheral components is important (small dimensions and low costs).
The IC has an FLL (Frequency-Locked-Loop) system with an intermediate frequency of 70 kHz. The i.f. selectivity is obtained by active RC filters. The only function which needs alignment is the resonant circuit for the oscillator, thus selecting the reception frequency. Spurious reception is avoided by means of a mute circuit, which also eliminates too noisy input signals. Special precautions are taken to meet the radiation requirements.

IC TDA7000Lay out IC TDA7000


Data IC TDA7000

Supply voltage range: 2,7 to 10 V
Supply current : 8 mA
R.F. input frequency range: 1,5 to 110 MHz
Sensitivity for -3 dB limiting
• (e.m.f. voltage)
• (source impedance: 75 Ohm mute disabled) EMF: 1,5 uV
Signal handling (e.m.f. voltage)
• (source impedance: 75 Ohm) EMF typ. 200 mV
A.F. output voltage at RL = 22 kOhm75 Mv

Supply voltage: max. 12 V
Oscillator voltage: 0,5 to VP0,5 V
Storage temperature 55 to 150 C
Operating ambient temperature 0 to 60 C.
.

No comments:

Post a Comment