Rangkaian Pendeteksi Air Hujan sederhana

type='html'>Rangkain Pendeteksi Air Hujan

circuit of rain detector uses a sensor made of a small piece of etched PC board and a simple SCR circuit to detect rain and sound a buzzer. The SCR could also be used to activate a relay, turn on a lamp, or send a signal to a security system.

Circuit of rain detector

Component list of rain detector

• R1 1K 1/4 W Resistor
• R2 680 Ohm 1/4 W Resistor
• D1 1N4001 Silicon Diode
• BZ1 12V Buzzer
• S1 SPST Switch
• SCR1 C106B1 SCR 106CY
• SENSOR
  

The sensor is a small piece of PC board etched to the pattern showen in the schematic. The traces should be very close to each other, but never touching. A large spiral pattern would also work.

Make sure to use a loud buzzer.